Pikasim

by codebruinc

192 downloads

Not rated

GitHub

Other

About

Browse, compare, and purchase eSIMs for 190+ countries via AI agents. 12 tools for searching 2,300+ data plans, checking coverage, and buying eSIMs with crypto or card. No account required for browsing.

Details

Author: codebruinc
Downloads: 192
Categories: Other

- Two product lines: data eSIMs and phone-number eSIMs
- Public search and pricing tools (no authentication required)
- Authenticated tools for purchase, balance, and wallet management
- Crypto funding: Bitcoin, Lightning, Monero, USDT, and 50+ altcoins
- Real carrier phone numbers (e.g., +1 on AT&T/T-Mobile)
- No personal account, email, or KYC needed

Setting up with Highlight

This MCP is not yet compatible with Highlight’s one-click setup. However, you can still use it with Highlight by following these steps:

Download and install Highlight from highlightai.com/download
Navigate to the plugins tab and select "Add Custom Plugin"
Configure the plugin with the settings below

Plugin Name Pikasim

Command (node, npx, python, etc.)

Please refer to the README for specific instructions on how to obtain API keys or other required environment variables.
Enable "Start Automatically" if you want the plugin to start when Highlight launches

Setting up with Cursor

Open Cursor's settings
Navigate to the MCP section
Click "Add new Global MCP server"
Copy and paste the configuration below based on your operating system

JSON

{
    "mcpServers": {
        "pikasim": {
            "pikasim": {
                "type": "streamable-http",
                "url": "https://pikasim.com/mcp"
            }
        }
    }
}

JSON

{
    "mcpServers": {
        "pikasim": {
            "pikasim": {
                "type": "streamable-http",
                "url": "https://pikasim.com/mcp"
            }
        }
    }
}

JSON

{
    "mcpServers": {
        "pikasim": {
            "pikasim": {
                "type": "streamable-http",
                "url": "https://pikasim.com/mcp"
            }
        }
    }
}

Setting up with Claude Desktop

Open Claude Desktop's settings
Go to the Integrations tab
Click "Add MCP Server"
Use the configuration below based on your operating system

Note: Make sure Claude Desktop is running before attempting to connect.

JSON

{
    "mcpServers": {
        "pikasim": {
            "pikasim": {
                "type": "streamable-http",
                "url": "https://pikasim.com/mcp"
            }
        }
    }
}

JSON

{
    "mcpServers": {
        "pikasim": {
            "pikasim": {
                "type": "streamable-http",
                "url": "https://pikasim.com/mcp"
            }
        }
    }
}

JSON

{
    "mcpServers": {
        "pikasim": {
            "pikasim": {
                "type": "streamable-http",
                "url": "https://pikasim.com/mcp"
            }
        }
    }
}

Setting up with Windsurf

Open Windsurf's preferences
Go to the Integrations section
Click "Add MCP Integration"
Use the configuration below based on your operating system

JSON

{
    "mcpServers": {
        "pikasim": {
            "pikasim": {
                "type": "streamable-http",
                "url": "https://pikasim.com/mcp"
            }
        }
    }
}

JSON

{
    "mcpServers": {
        "pikasim": {
            "pikasim": {
                "type": "streamable-http",
                "url": "https://pikasim.com/mcp"
            }
        }
    }
}

JSON

{
    "mcpServers": {
        "pikasim": {
            "pikasim": {
                "type": "streamable-http",
                "url": "https://pikasim.com/mcp"
            }
        }
    }
}

Setting up with Cline

Open Cline's settings
Navigate to the Integrations section
Click "Add MCP Server"
Copy and paste the configuration below based on your operating system

Note: Make sure to restart Cline after adding the configuration.

JSON

{
    "mcpServers": {
        "pikasim": {
            "pikasim": {
                "type": "streamable-http",
                "url": "https://pikasim.com/mcp"
            }
        }
    }
}

JSON

{
    "mcpServers": {
        "pikasim": {
            "pikasim": {
                "type": "streamable-http",
                "url": "https://pikasim.com/mcp"
            }
        }
    }
}

JSON

{
    "mcpServers": {
        "pikasim": {
            "pikasim": {
                "type": "streamable-http",
                "url": "https://pikasim.com/mcp"
            }
        }
    }
}

Setting up with Goose

Open Goose's preferences
Go to the Integrations tab
Select "MCP Servers"
Click "Add New Server"
Use the configuration below based on your operating system

JSON

{
    "mcpServers": {
        "pikasim": {
            "pikasim": {
                "type": "streamable-http",
                "url": "https://pikasim.com/mcp"
            }
        }
    }
}

JSON

{
    "mcpServers": {
        "pikasim": {
            "pikasim": {
                "type": "streamable-http",
                "url": "https://pikasim.com/mcp"
            }
        }
    }
}

JSON

{
    "mcpServers": {
        "pikasim": {
            "pikasim": {
                "type": "streamable-http",
                "url": "https://pikasim.com/mcp"
            }
        }
    }
}

From the repository

Add the server to your AI agent’s MCP configuration as a Streamable HTTP server pointing to https://pikasim.com/mcp. No API key is needed for browsing. To purchase, create a free agent wallet at pikasim.com/agent-wallet and attach its ak_live_ key via URL or Authorization header.

`search_esim_packages`

Search PikaSim eSIM plans by country code, region, or keyword. Returns BOTH product lines in separate buckets: DATA eSIMs and PHONE-NUMBER eSIMs (real carrier number + voice + SMS). Each result shows its packageCode in [brackets] for purchasing. Use type to narrow to one line.

`search_phone_plans`

Search PikaSim PHONE-NUMBER eSIMs — plans that include a REAL carrier phone number (not VoIP) with voice calls, SMS, and data. US plans give a real +1 number on AT&T and T-Mobile; local country plans cover Europe (French +33 number), Australia, Mongolia, Vietnam, and Maldives; global plans cover 157 countries. Use this when a user wants to call or text, not just data. Each result shows its packageCode in [brackets] for purchase_phone_plan.

`get_package_details`

Get full details for a specific plan (data eSIM OR phone-number eSIM): coverage, data, voice/SMS allowance, duration, price, networks, and purchase URL. Accepts the packageCode shown in [brackets] by the search tools.

`check_country_coverage`

Check what PikaSim plans cover a country. Returns TWO buckets: DATA eSIMs (count, price range, data amounts) and PHONE-NUMBER eSIMs (count, price range — a real carrier number with voice + SMS).

`get_pricing`

Get the USD price for a specific plan (data eSIM OR phone-number eSIM). Accepts the packageCode from any search result.

`get_phone_plan_pricing`

Get the USD price and voice/SMS/data allowance for a specific PHONE-NUMBER eSIM. Accepts the packageCode from search_phone_plans.

`search`

Search the PikaSim eSIM catalog (data eSIMs and phone-number eSIMs) by free-text query and/or ISO country code. Returns a list of matching plans, each with an id, a title (name + price), and a pikasim.com URL. Pass an id to the fetch tool for full details. Read-only.

`fetch`

Fetch full details for one PikaSim eSIM plan by the id returned from search: coverage, data, voice/SMS allowance, duration, price, networks, and its pikasim.com purchase URL. Read-only.

`create_wallet`

Create a NEW PikaSim agent wallet for autonomous purchasing — no human, no browser, no account, no email, no KYC. Returns a wallet code + an ak_live_ API key + a small spend-only welcome credit, so you can immediately reconnect with the key (Authorization: Bearer ak_live_…) and buy an eSIM, phone number, or SMS verification number. Use this when the user has NO wallet yet and wants their agent to buy. If the user ALREADY has a wallet, do NOT create a new one — reconnect the existing wallet instead (ask them for it). You accept the Terms of Service (https://pikasim.com/tos) on the user's behalf by passing acceptTos=true.

`check_balance`

Returns the prepaid spending balance of the connected PikaSim agent wallet, in USD. Read-only; makes no changes. Call this before purchase_esim or purchase_phone_plan to confirm sufficient funds, or any time you need the current balance. Requires a connected agent wallet (OAuth or ak_live_ key). If no wallet is connected, the result explains how to connect one.

`purchase_esim`

Purchase a DATA eSIM. Deducts from your prepaid agent wallet and returns order details with activation info (ICCID, QR code, SM-DP+). Use the packageCode from search_esim_packages. For a daily-reset "Unlimited" plan, also pass days (the number of days to buy). For phone-number eSIMs use purchase_phone_plan instead. Requires an agent-wallet API key (ak_live_).

`purchase_phone_plan`

Purchase a PHONE-NUMBER eSIM — a plan with a real carrier phone number (voice + SMS + data). Deducts from your prepaid agent wallet and returns order details with activation info (ICCID, QR code, SM-DP+). The real phone number is assigned by the carrier when the eSIM registers on the network and appears in the device settings after activation. Use the packageCode from search_phone_plans. Plans whose search result says "designated-date activation" REQUIRE activationDate. Requires an agent-wallet API key (ak_live_).

`get_esim_status`

Returns the live status, remaining/used data, and expiration date for one eSIM you own, looked up by its ICCID. Read-only. Use this after a purchase to track an eSIM, or whenever a user asks "how much data is left" or "is my eSIM active". The ICCID is returned by purchase_esim/purchase_phone_plan and listed by list_orders. Requires a connected agent wallet (OAuth or ak_live_ key).

`topup_esim`

Adds more data (and on some plans voice/SMS) to an existing eSIM the user already owns, without issuing a new eSIM. This SPENDS the wallet balance and cannot be undone. First call get_topup_options with the same ICCID to get valid top-up package codes and prices, then pass one here. Use when a user wants to extend an eSIM that is running low rather than buy a new one. Requires a connected agent wallet (OAuth or ak_live_ key).

`list_orders`

Returns the order history for the connected wallet, newest first: each order's ID, package, status, cost, date, ICCID, and install link. Read-only and paginated. Use this to find a past purchase, retrieve an ICCID for get_esim_status, or show a user what they have bought. Results are scoped to this wallet only. Requires a connected agent wallet (OAuth or ak_live_ key).

`list_esims`

List every eSIM this wallet owns (the fleet view), newest first: ICCID, plan, order status, install link, and — for fleets of up to 8 — live remaining data inline. Read-only. Use this to answer "which eSIMs do I own / how much data is left" without already knowing an ICCID; then get_esim_status for any single eSIM's full detail. eSIMs only — SMS numbers are listed by list_sms_orders. Requires a connected agent wallet.

`list_transactions`

The wallet ledger: every debit and credit (deposits, purchases, refunds) with amount, running balance, and description, newest first. Read-only and paginated; filter with type. Use this to reconcile spend or answer "where did the balance go" — check_balance only gives the current number.

`create_deposit`

Creates a payment invoice to add funds to the connected prepaid PikaSim Wallet, and returns a payment page link (the human can pay by card with 3D Secure, or crypto) plus per-coin crypto payment details. Accepts Bitcoin, Lightning, Monero, Zcash, USDT, and 50+ altcoins, or card on the payment page. Does not move funds itself; it returns an invoice the user pays externally, and the balance updates once the payment confirms. Use when check_balance is too low to purchase. Minimum deposit is $1 (no prepaid float required). A fully-autonomous agent holding crypto can pay WITHOUT a human: the tool returns native destinations for Lightning, Bitcoin on-chain, USDT (TRC-20/Tron), and Monero — pay the amount to any one of them. Crypto has no fee; card payments add a 2.9% processing fee on top of the credited amount. Balance is prepaid credit for purchases on PikaSim, never expires, and is not redeemable for cash. Requires a connected agent wallet (OAuth or ak_live_ key).

`get_topup_options`

List available top-up packages for an existing eSIM, including price and data amount. Use this before topup_esim to find valid package codes. Requires an agent-wallet API key (ak_live_).

`cancel_esim`

Cancel an unused eSIM and receive a refund to your wallet balance. Only works if the eSIM has not been installed or activated. Requires an agent-wallet API key (ak_live_).

`search_sms_services`

Search the SMS VERIFICATION service list — websites/apps a receive-only verification number can get a code for (Discord, Google, Telegram, ...). This is the SMS product line (no eSIM, nothing to install): the user gets a temporary phone number and reads the incoming code. Returns service names with their serviceId in [brackets]. If the target service is not listed, search "Other" — the catch-all works for any site. Next step: get_sms_service_countries.

`get_sms_service_countries`

List the countries offering a quick SMS verification number for one service, with live price, delivery success rate, and whether the number is a real mobile (non-VoIP) or VoIP line. Sorted by success rate — prefer high success rates, and prefer non-VoIP when the target service blocks virtual numbers. Returns each countryId in [brackets] for order_sms_verification.

`list_sms_rentals`

List long-term SMS RENTAL numbers: keep the same receive-only number for days to months and receive multiple SMS (fair-use 25/day). Shows each country with its rentalId, duration tiers, live prices, and LIVE STOCK per duration — skip tiers marked OUT OF STOCK. US/UK numbers are real mobile (non-VoIP); Canada is VoIP. Not allowed for banking/financial/crypto-exchange verification. Purchase with rent_sms_number.

`order_sms_verification`

Buy a QUICK SMS verification number: returns a temporary phone number the user enters on the target service, then the incoming code is read with check_sms_verification. This SPENDS the wallet balance (typically $0.50-$5). Single-use, valid 20 minutes, auto-refunds if no SMS arrives. Use search_sms_services and get_sms_service_countries first to pick serviceId and countryId. Requires a connected agent wallet.

`check_sms_verification`

Poll a quick SMS order for the incoming verification code. Read-only. Call every 15-30 seconds after order_sms_verification until status is "received", then relay the code (and full message) to the user. Orders auto-refund if nothing arrives within 20 minutes. Requires a connected agent wallet.

`cancel_sms_verification`

Cancel a quick SMS order that is still waiting for a code and refund it to the wallet immediately. Refused if the SMS was already delivered (read it with check_sms_verification instead). Requires a connected agent wallet.

`list_sms_orders`

List this wallet's SMS orders — quick verification orders (with their Order IDs) and long-term rentals (with their receipt IDs, numbers, and expiry dates). Read-only. Use it to re-find an order ID or check what is still active. Requires a connected agent wallet.

`rent_sms_number`

Rent a LONG-TERM receive-only SMS number: the user keeps the same number for the whole rental and can receive multiple SMS (fair-use 25/day). This SPENDS the wallet balance. Use list_sms_rentals first for rentalId, valid day tiers, prices, and live stock (do not order an OUT OF STOCK tier). Extendable before expiry with extend_sms_rental, and cancellable for a full refund with cancel_sms_rental within 2 hours if no messages arrived. Not allowed for banking/financial/crypto-exchange verification. Requires a connected agent wallet.

`get_sms_rental_messages`

Read the inbox of a long-term SMS rental: all received messages, newest first, plus the number's status and expiry. Read-only; poll it when the user expects a message. The receiptId comes from rent_sms_number or list_sms_orders. Requires a connected agent wallet.

`extend_sms_rental`

Extend a long-term SMS rental so the user keeps the same number — days are ADDED on top of the current expiry. This SPENDS the wallet balance at the live tier price (the tool checks the price first and reports what was charged). Valid day options are the same duration tiers the rental was offered at. Extend BEFORE expiry; an expired rental usually cannot be recovered. Requires a connected agent wallet.

`cancel_sms_rental`

Cancel a long-term SMS rental and refund the full amount to the wallet. Only works within 2 hours of purchase AND only if the number has NOT received any message — this mirrors the provider refund window, so if the window has passed or a code already arrived it returns a clear reason and refunds nothing (the number worked). Use for a genuine change of mind or a wrong purchase shortly after renting. The receiptId comes from rent_sms_number or list_sms_orders. Requires a connected agent wallet.

Claude Desktop / Cursor

Paste into your MCP client config file to install this server.

{
    "mcpServers": {
        "pikasim": {
            "pikasim": {
                "type": "streamable-http",
                "url": "https://pikasim.com/mcp"
            }
        }
    }
}

McpServers

{
    "pikasim": {
        "type": "streamable-http",
        "url": "https://pikasim.com/mcp"
    }
}

PikaSim MCP Server

> Buy eSIMs from an AI agent — no account, no email, no KYC. Anonymous data plans and real carrier phone numbers across 190+ countries, settled in crypto from a prepaid agent wallet.

PikaSim is a remote, hosted MCP server (Streamable HTTP). You don't run any code — just point your AI agent at the URL and it can search plans, check coverage, get pricing, and (with a funded agent wallet) purchase eSIMs autonomously.

- Endpoint: https://pikasim.com/mcp
- Transport: Streamable HTTP (JSON-RPC over HTTP POST), protocol 2025-03-26
- Docs: https://pikasim.com/mcp-docs
- Agent wallet: https://pikasim.com/agent-wallet
- Browsing needs no key. Purchasing needs a prepaid ak_live_ agent-wallet key.

---

Quick start

Add PikaSim to your AI agent's MCP config:

{
  "mcpServers": {
    "pikasim": {
      "type": "streamable-http",
      "url": "https://pikasim.com/mcp"
    }
  }
}

That's it — your agent can now search data and phone-number eSIM plans, check country coverage, and get pricing for 190+ countries. No API key needed for browsing.

To purchase too, create a free agent wallet (a prepaid, crypto-funded balance at retail pricing) and attach its ak_live_ key (see Authentication).

---

Two product lines

Don't assume "eSIM" means data-only. PikaSim sells both:

1. Data eSIMs — anonymous data plans across 190+ countries, from $0.75. Discover with search_esim_packages / check_country_coverage; buy with purchase_esim.
2. Phone-number eSIMs — a real carrier phone number (not VoIP) with voice calls, SMS, and data. US plans give a real +1 number on AT&T and T-Mobile; global plans cover 157 countries. Discover with search_phone_plans; buy with purchase_phone_plan.

search_esim_packages and check_country_coverage return both lines in separate buckets. Package codes appear in [brackets] — pass them to the matching purchase tool.

---

Setup guides

PikaSim is a remote MCP server at https://pikasim.com/mcp. The config key and steps differ per client.

Claude Desktop

Remote servers are added as Connectors, not via claude_desktop_config.json. Go to Settings → Connectors → Add custom connector and paste https://pikasim.com/mcp. To purchase, paste https://pikasim.com/mcp/ak_live_YOUR_KEY instead.

Claude Code (CLI)

```bash

No reviews yet — be the first

Use Google, GitHub, or an email account so ratings stay tied to real people.

Email sign in

No reviews posted yet.

About

Details

Jump to

Setting up with Highlight

From the repository

search_esim_packages

search_phone_plans

get_package_details

check_country_coverage

get_pricing

get_phone_plan_pricing

search

fetch

create_wallet

check_balance

purchase_esim

purchase_phone_plan

get_esim_status

topup_esim

list_orders

list_esims

list_transactions

create_deposit

get_topup_options

cancel_esim

search_sms_services

get_sms_service_countries

list_sms_rentals

order_sms_verification

check_sms_verification

cancel_sms_verification

list_sms_orders

rent_sms_number

get_sms_rental_messages

extend_sms_rental

cancel_sms_rental

Claude Desktop / Cursor

McpServers

PikaSim MCP Server

Quick start

Two product lines

Setup guides

Claude Desktop

Claude Code (CLI)

Install

More like this

Sequential Thinking

Filesystem

EverArt

Google Drive

Reactive Resume

FastMCP v2 🚀

`search_esim_packages`

`search_phone_plans`

`get_package_details`

`check_country_coverage`

`get_pricing`

`get_phone_plan_pricing`

`search`

`fetch`

`create_wallet`

`check_balance`

`purchase_esim`

`purchase_phone_plan`

`get_esim_status`

`topup_esim`

`list_orders`

`list_esims`

`list_transactions`

`create_deposit`

`get_topup_options`

`cancel_esim`

`search_sms_services`

`get_sms_service_countries`

`list_sms_rentals`

`order_sms_verification`

`check_sms_verification`

`cancel_sms_verification`

`list_sms_orders`

`rent_sms_number`

`get_sms_rental_messages`

`extend_sms_rental`

`cancel_sms_rental`